Bring commercial grade to your home!
The main feature of the Art.T1 Sixties espresso machine in a commercial environment is its extreme compactness versus performance - the result of an Elektra design study in placing a whopping 5.5 liters of boiler capacity into such a small frame and body. However, for the home, this can be one BIG machine. It does require a direct water connection and drainage, but these conveniences are highly desired by the espresso experts. With a direct water line connection to your cold water plumbing, you never have to worry about filling any water tank, but you do have to remember to recharge the optional water softener. It is also great to never have to pull the drip tray to empty into your sink - one only needs to remove it for cleaning.
This machine's high wattage heating element is designed to heat the boiler for quick recovery and temperature stability. The Elektra Art.T1 even generates a lot of heat to keep those cups nice and toasty on top (minimum 2 hours required to pre-heat cups).

The Art.T1 has 6 programmable buttons to measure the amount of water being pumped through the espresso coffee grinds. The extra 'K' button on the touchpad allows the operator to use the machine as a semi-automatic (start and stop of the espresso extraction) and to program the other 6 buttons.
Highlighted Features:
- Beautiful Ultra-polished stainless steel finish
- Commercial-grade steel frame
- Incorporated motor and positive (rotary vane) displacement pump with vibration-damping fastening is pretty quiet when compared to tank model machines that have a vibration pump
- Electronic level control system monitors water level in the boiler to make sure the heating element is submerged in water.
- Patented heat exchanger accessible from top of boiler for easy inspection and cleaning by a technician or capable home-owner
- Filter in the grouphead removes any large contaminants that may have passed through a broken filter on the water line.
- Multi-directional steam wand allows movement of steam wand in many different directions
- Steam valve and water valve have pivotal lever controls
- Elektra trademark on back of machine made of anodized aluminum
- Dual-acting, high-precision gauge shows both pump water pressure and boiler steam pressure (without a water softener, this will be one of the first parts to fail due to limescale which is not covered under our parts warranty)
- High quality bleeder valve releases vacuum pressure in boiler so that steam wand does not need to be kept open upon next powering up of machine (without a water softener, this will be one of the first parts to fail due to limescale which is not covered under our parts warranty)
- Heating element with built-in safety thermostat for additional protection - if the machine has power, but there is no water available from the plumbed cold water lline, the machine can be damaged at the heating element or pump)
- Electronic motherboard positioned in cool area and is protected against humidity
- Plastic bakelite handle on portafilter, pull lever, and valve controls - wood is not used because water can damage it.
- Accessories: 1-cup and 2-cup filter baskets, single spout and double spout portafilter, instructions, and stainless steel braided hose for direct water connection

- Approximate Measurements: 18.5" H x 14" W x 20" D without portafilter
- Weight: 83 pounds shipped via freight truck to curbside only - sorry, inside delivery is not available.
- Power requirements: 2200 watts 20 amps dedicated 110 volts
- Boiler Capacity: 5.5 liters
- Grouphead: Single grouphead made of brass
- Limited Warranty: One year parts only warranty limited to manufacturer's defect determined and handled by importer's agent.
- Made in Italy
- Units are tested and calibrated (immediately prior to shipping) with water AND one shot of espresso.

Espresso4Home Return Policy:
All Defects on Arrival/Damage claims must be reported within five (5) days of receipt/delivery. Customers should not use the equipment with coffee, must keep all original packaging, and on machines with any protective coating, the protective film must remain on. Espresso machines should be first tested with water only, and grinders should be run without beans. Satisfactory returns must include the original shipping label on original outer box. Failure to comply will result in denial of credit to your account. Satisfactory returns must include the original accessories, original packaging, and proper packing of loose articles to avoid damage.

Espresso4Home Cancellation Policy:
For orders that has a tracking number produced and/or shipped, an order can not be canceled. Refunds, less shipping costs and restocking fee, will only be provided if the customer refuses delivery and the item is returned in brand new condition in an unopened box. Espresso 4 Home, LLC reserves the right to determine the outcome of a refund, and shipping costs (both ways) will be deducted from any credit. For orders that have NOT shipped, a 3% cancellation fee for PrePay credit card customers is deducted from the credit.

One-year parts warranty limited to manufacturer's defect and provided by 1st-line Equipment, LLC.
THERE IS NO LABOR WARRANTY. Based on the significant discount off the previous regular selling price we can no longer include a labor warranty.